Version 16 controller

The controller is modulating, ie. the boiler adapts to the heating needs you have, and should you have very low needs, e.g. in the summer, the furnace turns off and starts by itself, with the built-in electric ignition.

Standard with the controller is:

• 1 pcs. Temperature sensor of the type NTC (2.5 meter)
• 1 pcs. IEC C13 external auger connector (2.2 meter)
• 1 pcs. 12 pin burner connector (2.2 meter)
• 1 pcs. Cable with DK plug w/ground
• 1 pcs. IEC C13 connector for ashbin
• 1 pcs. PT1000 Smoke temperature sensor
• 1 pcs. Wall bracket
• 1 pcs. WIFI module (can be changed to LAN module*)
  *Accessories must be purchased separately

The controller has the following outputs:

• 16 pcs. 230V.

The controller has the following inputs:

• 10 pcs. Temperature
• 1 pcs. Photosensor
• 2 pcs. Distance sensors
• 1 pcs. BUS for expansion module
• 1 pcs. Oxygen sensor
• 2 pcs. External contact
• 4 pcs. Pulse
• 1 pcs. Micro SD slot

The controller supports:

• Hot water prioritization with weekly schedule
• Boiler temperature with weekly schedule
• Distance sensor for ashbin
• External filling*
• Distance sensor hopper (300157)
• Smoke temperature (300089)
• 4 Weather compensation zones
• Compressor cleaning with weekly schedule
• Oxygen management
• Connection to the Internet (StokerCloud)
• External energy management based on solar cell production*
• Heat pump control based on electricity prices/wood pellet price
• Live update from Nordpool electricity exchange
• Outdoor temperature via temperature sensor or nearest weather station
• SMS & Email Alarms (StokerCloud)
• Negative pressure measurement (900563)
• LAN module (700012)
• Expansion print with 7 inputs / outputs (300211)
• Solar heating control
• Vacuum transport
• Pump control based on boiler temperature
  *Accessories must be purchased separately